Wax heater TIN AM-220, white

Professional wax heater with thermostat and temperature display and the ability to work in two modes. Suitable for all types of depilatory waxes in a can, hard wax, dragee (a bucket attached to the heater in which you can melt hard or pearl wax).

1) The first working mode is manual heating. This means that after start-up, the default temperature is 90. You can press the "Up" and "Down" buttons to set the required heating temperature. The adjustment range is from 45℃ to 125℃. In this mode, all button lights are lit and all functions can be controlled.

2) The second operation mode is a 40-minute fast automatic heating mode. This mode is suitable for heating wax beans. After activating the manual heating mode, press the "Constant" button briefly to switch to automatic mode. In this mode, the device automatically heats up to 125℃ for 40 minutes and then switches to 90℃ constant temperature heating. When the display shows 90℃, the device will beep twice to let you know that its temperature has been set.

Technical data:

Power: 100 W
Voltage: 220V-240V (60Hz)
Capacity: 400 ml
Temperature: 45 - 125 degrees C.

Note:
* Do not heat without wax. Do not submerge in water.
* Make sure the voltage you are using matches the device
* Not recommended for use on skin with allergies, scars or acne.
* Before use, check whether the temperature of the wax is suitable for the skin
* Disconnect the power before cleaning

Download the LT instruction