Introducing the "Carelika Hot Towel Device" - it is the best and most convenient solution for professional spa and cosmetology procedures!

The Carelika Hot Towel Device uses advanced heating technology as well as compressed towel technique to quickly and efficiently heat towels to the perfect temperature for a pleasant experience every time. The device saves the specialist's time and inventory space, as it is extremely compact in size and uses special single-use towels compressed to just a few centimeters, which soften when heated by the device.

The device is easy to use and maintain.

The heater has an intuitive control panel.

Instructions for use of the Hot Towel device:

1. Add water and insert the compressed towel tablet (please do this when the machine is turned off)
2. Open or remove the water tank and add clean water below the MAX water level.
3. Place the water tank back into the appliance and check that the water tank is properly seated.
4. Remove the cylinder cap of the towel pack, tear off the plastic wrap of the compressed towel, insert the compressed towel tablet into the device, and check that the compressed towel is in place, properly inserted (Be careful not to tear the aluminum foil.)
5. If the compressed towel tablet is not seated, twist and press to make sure it is seated properly.

Adjust the temperature of the towel:

• Press and hold the "start" button for 6 seconds, the machine will beep for a long time and enter/select towel heating temperature setting state. The set temperature indicator flashes.
• Press the "start" button and the heating temperature of the towel will alternate between no heating (blue light) , low temperature (green light) and high temperature (red light) .
• After selecting the desired temperature, press the start button for 2 seconds to confirm that you have selected to exit the temperature setting mode.

Normal mode:

1. After placing a compressed towel and adding water, connect the product to the electrical outlet and enter the self-test mode of the device.
2. All indicators light up simultaneously, and the product will complete the self-test after a long beep.
3. Press and hold the start button and the product will beep briefly, indicating that the compressed towel heating and moistening process will begin, which includes:

• Softening a compressed towel;
• Towel heating and humidification;
• The process will end after the device beeps for a long time;

4. Remove the hot towel and the device will automatically reset. (if the hot towel is not picked up, the device beeps until the hot towel is removed).

Cleaning mode:

1. Empty the water from the water container and add the required amount of already prepared citric acid solution (recommended 100ml).
2. Press the start/power button 5 times in a row, enter the cleaning mode and automatically push out the drawers, water shortage and towel shortage indicators will flash at the same time.
3. Press the start button, then a short sound will be heard and the citric acid solution will be automatically discharged from the drawer.
4. Leave for 5-10 minutes and wipe the citric acid solution in the drawer with a dry towel. (Step 3, 4 can be repeated 1-2 times).
5. Empty the citric acid solution from the water tank, add the required amount of clean water and repeat steps 3 and 4 to clean up the remaining citric acid solution.
6. Press and hold the start/power button, turn off the cleaning mode by hearing a long device sound on the panel, automatically pull out the drawer and clean it.

Specifications:

• Nominal input | 100V ~50/60Hz
• Rated power | 750W
• Implementation standard | J60335-1/J60335-2-43; J55015
• Device measurements | 220mm*100mm*200mm

Maintenance:

Use pure water or filtered tap water. Due to different water sources, regular descaling is recommended. Use a citric acid descaling agent to clean the water tank.

Note:
The towel code for this heater is CPCDT20

DOWNLOAD INSTRUCTIONS FOR THE DEVICE